Panic Button for Driver

★Metal button
★Real-time video pop-out and snap-shot by alarm linkage
★to generate alarm reports for search and download

1.Wiring Guidance

To connect thetwo wires of the panic button to the two wires (SENSOR IN1 and 12V) from the 24pin I/O cablesof MDVR. Defaulted high voltage trigger is 12V /5V.

 

             Wiring-Guidance      

 

 

SENSOR IN1 and 12V-OUT is for panic button alarm input out of the MDVR 24pin I/O cables.

 

 

  is-for-panic-button-alarm-input-out-of-the

 

2、to Configure on the Firmware

Enter the menu → Alarm  → Sensor  → enable the “IO-1” option

It uses the high voltage trigger to linkage the camera channel to enable real-time video pop-out when alarm triggered.

 to-Configure-on-the-Firmware

3、to configure on the IVMS Client Software

Login IVMS clientsoftware, click the “Other” →“alarm Config”

 IVMS-Client-Software

On the “Alarm Config” page, choose the “Alarm Type”as the “emergency button alarm/IO_1”, then save it.

 on-the-IVMS-Client-Software-1

 

When the driver presses the panic button, the alarm will be triggered, and sent to the server from the MDVR via 3G /4G. It will pop out a real-time video on the IVMS Client software at the same time.

IVMS-Client-Software-2

 IVMS-Client-Software-3

There are other alarm type optional according to different type of alarm applications, please consult with our technical team for further information.

Thank you.

 

<End>

X
Email :*
Subject : *
Message : *
SEND
展开客服