Model |
JH4-HD V2 |
|
System |
Language | English / Chinese |
Operation Interface | Graphical User Interface(OSD menu) |
Password Security | 2 Levels: Administrator or User |
Video |
Video Input | Supports 4 channels 1080P AHD camera Video input |
Supports 4 channels CIF/HD1/D1/960H/720P AHD camera Video input |
Supports 2-CH 1080P AHD + 2-CH 720P AHD mixing Video input |
Supports 2-CH 1080P AHD + 2-CH 960H analog mixing Video input |
Supports 2-CH 720P AHD + 2-CH 960H analog mixing Video input |
Supports 1-CH 720P/1080P IPC + 4-CH 720P AHD/960H/D1/CIF Video input |
Supports 1-CH 720P/1080P IPC + 4-CH 1080P AHD Video input |
Video Output | 2 Channels (Front Panel 3.5mm Jack, Rear Panel on 24 pin I/O Port ) |
Video Display | Single picture, 1~5 pictures |
Signal System | PAL / NTSC ( PAL@100 frame 720P/sec; NTSC@120 frame 720P/sec ) |
Audio |
Audio Input | 4 Channels |
Audio Output | 2 Channels (Front Panel 3.5mm Jack, Rear Panel on 24 pin I/O Port ) |
Record Format | Synchronized A/V recording |
Recording & Storage |
Image Resolution | CIF / HD1 / D1 / 960H / 720P optional |
Video Coding | ISO14496-10 Industry Standard |
Video Bit Rate | CIF: 1536Kbps ~ 128Kbps, |
HD1/D1: 2048Kbps ~ 400Kbps, |
960H: 2048Kbps ~ 400Kbps, |
720P: 4096Kbps ~ 400Kbps |
Select from 8 Levels of Video Image Quality ranging from 1(Highest) to 8(Lowest) |
Audio Bit Rate | 40Kbps |
Storage | Up to 2TB HDD/SSD and 1 SD card for backup(at 3G/4G/WIFI model option) |
Alarm |
Alarm Input | 8 Channels, Select Trigger for either less than 1VDC or greater than 5VDC |
Alarm Output | 1 Channel, 12V output |
Communication Ports |
RS485 | 1 Port for PTZ control or Data Device usage |
RS232 | 2 Port for communication or data usage |
RJ45 Network | 1 Port of RJ45, For connection to an IP camera with maximum of 1080P |
USB | 2 Ports for USB 2.0, the front panel one to download video files & upgrade firmware; the rear panel one is optional. |
Wireless Communication* |
3G* | 3G optional Internal module |
4G* | 4G optional module to match local cellular carrier |
Wi-Fi* | Internal Wi-Fi ( 2.4 / 5.8 Ghz) optional |
GPS* |
Int'l Standard GPS | Internal GPS module. Real-time geographic coordinates, speed information |
G-Sensor |
Internal G-Sensor | Supports 3 Axis Motion Detection with user set ranges, for X, Y and Z coordinates |
Software |
PC Playback | A/V, GPS, Mapview, Speed, G-Sensor, etc. files available for playback on PC. Limited playback is also available on MDVR |
IVMS | Wireless (require Wi-Fi or cellular Option) real-time A/V monitoring, GPS, alarms, etc. |
Software Upgrade |
Local or Remotely | Upgrade through the front USB 2.0 or remotely via IVMS platform |
Voltage Input |
+8V~+36V | 8~36VDC Please check operational voltage of vehicle prior to the installation of the MDVR and its accessories to prevent possible damage |
Voltage Output |
12V | 12V (+/-0.2V) , Max 3A |
ACC Detection |
≤4V | Power-off |
≥6V | Power-on |
Video Input Resistance |
75Ω | 75Ω |
Video Output Voltage |
2Vp-p | 2VP-P CVBS output analog signal, screen input requires 75Ω resistance |
I / O Port |
<1V | Low voltage trigger |
>5V | High voltage trigger |
Operational Temperature |
-40℃~80℃ | Install in well ventilated area, protected from moisture, heat, dust and vibration |
Dimensions |
192x184x61mm | Including Security Cover 248x184x61mm |
Still Have Questions?
If you would like help finding the right information to meet your requirement please leave us a message below, one of our sales representatives will be happy to assist you shortly!